Cisco 7600-SIP-400

Cisco 7600-SIP-400
Нажмите, чтобы увеличить
Цена: уточняйте
Артикул: 7600-SIP-400
Производитель: Cisco




Cisco Route Switch Processor 720 3C/3CXL, Cisco Supervisor Engine 720-3B/3BXL, and Cisco Supervisor Engine 32 (Sup-32) systems

Minimum software compatibility

Cisco IOS® Software Release 12.2(18)SXE, or later releases for Supervisor Engine 720-3B/3BXL and Supervisor Engine 32 systems in native mode Cisco IOS Software; also, 12.2(33)SRB or later releases for RSP720-GE-3CXL and RSP720-GE-3C systems


• User Datagram Protocol (UDP)
• IPv4 Unicast and Multicast
• IPv6 Unicast and Multicast
• Multiprotocol Label Switching (MPLS)


• Frame Relay
• Point-to-Point Protocol (PPP)
• High-Level Data Link Control (HDLC)
• ATM permanent virtual circuit-constant bit rate (PVC-CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR)
• ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, UBR+
• TDM over MPLS, ATM over MPLS, and ATM over GRE
• L2TPv3

Cards, ports, and slots

Four SPA bays per Cisco 7600 SIP-400


QoS, ACLs, and Low-Speed Aggregation Features


• Modular QoS CLI (MQC)
• Classification based on:
• IP Precedence (IPv6 and IPv4)
• Diffserv code point (DSCP) (IPv6 and IPv4)
• MPLS experimental values (MPLS EXP)
• Extended ACL
• Frame Relay DE
• Class of Service (CoS)

Congestion Avoidance

• Weighted Random Early Detection (WRED) based on IP Precedence, DSCP, MPLS EXP, ECN (mark IP TOS field for POS traffic)


• Congestion management
• Per-virtual circuit queuing
• Ingress and egress Low-Latency Queuing (LLQ)
• Egress Class-Based Weighted Fair Queuing (CBWFQ)

Traffic Classification, Shaping, and Bandwidth Policing

• Marking
• Policing
• Distributed traffic shaping (DTS)
• Hierarchical service policies


• Standard and extended ACLs

Layer 2 and Layer 3 VPNs

• Ethernet over MPLS (EoMPLS)
• ATM over MPLS (ATM over MPLS)
• ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single and packed cell relay virtual circuit mode
• Frame Relay over MPLS (FRoMPLS)
• Layer 3 MPLS/VPN over GRE
• ATM over GRE, Ethernet over GRE
• TDM over MPLS

High availability

• IPv4 Nonstop Forwarding (NSF)
• IPv4 Stateful Switchover (SSO)
• Automatic Protection Switching (APS) with ATM, POS SPAs
• OIR for both SIP and SPA


1 GB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) per Cisco 7600 SIP-400

Supported SPAs


• 2-port 1 GE SPA (V1 and V2)
• 5 port 1 GE SPA (V2 only)
• 1-port 10GbE SPA LAN PHY (V2 only)


• Cisco 2-Port OC-3c/STM-1c ATM SPA
• Cisco 4-Port OC-3c/STM-1c ATM SPA
• Cisco 1-Port OC-12c/STM-4c ATM SPA
• Cisco 1-port OC48/STM16 ATM SPA


• Cisco 2-Port OC-3c/STM-1c POS SPA
• Cisco 4-Port OC-3c/STM-1c POS SPA
• Cisco 1-Port OC-12c/STM-4c POS SPA
• Cisco 1-Port OC-48/STM16-c POS/RPR SPA (POS mode only)


• Cisco 8-port Channelized T1/E1 SPA
• Cisco 2-port Channelized T3 to DS0 SPA
• Cisco 4-port Channelized T3 to DS0 SPA
• Cisco 2-port T3/E3 Serial SPA
• Cisco 4-port T3/E3 Serial SPA
• Cisco 1-port Channelized STM1/OC3 to DS0 SPA

CEoP/Channelized ATM SPA

• Cisco 24-port T1/E1 Circuit Emulation over Packet SPA (CEoP)
• Cisco 1-port OC-3/STM-1 Circuit Emulation over Packet SPA
• Cisco 2 port channelized T3 Circuit Emulation and channelized ATM SPA1

Environmental conditions

• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -40 to 167°F (-40 to 75°C)
• Relative humidity: 10 to 90 percent, noncondensing
• Operating altitude: -60 to 2000m


• Cisco Entity Asset MIB
• Cisco Entity Field-Replaceable Unit (FRU) Control MIB
• Cisco Entity Alarm MIB
• Interface IF MIB (RFC 2233)
• Frame Relay MIB (RFC 1315)
• Cisco Frame Relay MIB
• ATM MIB (RFC 1695)
• Definitions of Managed Objects for Bridges (RFC 1493)
• Evolution of Interfaces Group of MIB-II (RFC 1573)
• SNMP MIB II (RFC 1213)
• Remote Monitoring (RMON) MIB (RFC 1757)
• Switch Monitoring (SMON) MIB

Network management

Supported with CiscoWorks CiscoView

CiscoWorks Resource Manager Essentials (RME)

Cisco IP Solution Center (ISC)

Physical specifications

• Occupies one slot in a Cisco 7600 Series router
• Supports up to 12 Cisco 7600 SIP-400s in a 13-slot chassis
• Requires Supervisor Engine 720-3B or 720-3BXL
• Dimensions (H x W x D): 1.75 x 15.375 x 16 in.
• Weight: 16 lbs not including the packaging


185W power consumption per Cisco 7600 SIP-400

265W maximum power consumption with 4 SPAs


Cisco 7600 SIP-400 status: green (operational); orange (faulty)

Regulatory compliance


CE marking

• UL 60950
• CSA C22.2 No. 60950
• EN60950
• TS001
• IEC 60950
• AS/NZS3260
• UL60950


• FCC Part 15 Class A
• ICES-003 Class A
• VCCI Class A
• EN55022 Class A
• CISPR22 Class A
• AS/NZS3548 Class A
• EN61000-3-2
• EN61000-3-3
• EN61000-3-1
• EN55024
• EN50082-1
• EN300 386



• ITU-T G.610
• ITU-T G.703
• ITU-T G.707
• ITU-T G.783 Sections 9-10
• ITU-T G.784
• ITU-T G.803
• ITU-T G.813
• ITU-T G.825
• ITU-T G.826
• ITU-T G.841
• ITU-T G.957 Table 3
• ITU-T G.958
• ITU-T I.361
• ITU-T I.363
• ITU I.432
• ITU-T Q.2110
• ITU-T Q.2130
• ITU-T Q.2140
• ITU-T Q.2931
• ITU-T O.151
• ITU-T O.171
• ETSI ETS 300 417-1-1
• ACA TS 026 (1997)
• BABT /TC/139 (Draft 1e)
Для этого товара нет дополнительных изображений