Валюта

US Dollar - 1.00
Безнал с НДС - 0.00
Грн. нал. - 0.00

Контакты

 +38 (044) 33-999-55
 +38 (063) 42-25-999
 +38 (066) 83-94-999
 networks.ua@gmail.com

HP X132 10G SFP+ LC ER Transceiver J9153A

HP X132 10G SFP+ LC ER Transceiver J9153A
Нажмите, чтобы увеличить
Цена: уточняйте
Артикул: J9153A
Производитель: Hewlett Packard

Модуль приема-передачи(трансивер)  HP X132 10G SFP+ LC ER (J9153A). Высокая сокрость Ethernet соединения модуля (до 10 Гбит в секунду) позволяет использовать трансивер в оборудовании дата-центров, серверах и транспортных приложениях поставщиков услуг связи.

10 Гбит трансивер HP X132 10G SFP+ LC ER. Длина волны 1550 нм, длина кабеля до 40км. SMF

 

Overview

 

HP SFP+ Transceivers (SR, LRM, LR and ER)

 

 

Models

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC ER Transceiver

J9153A

 

 

Technical Specifications

 

HP X132 10G SFP+ LC SR Transceiver(J9150A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only

Connectivity

Connector type

LC

Wavelength

850 nm

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)

Weight

0.04 lb. (0.02 kg)

Transceiver form factor

SFP+

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

Operating relative humidity

0% to 85%, noncondensing

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical

0.6 W

Power consumption maximum

0.8 W

Cabling

Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively;
Maximum distance:

  • 2-26m with 62.5 µm multimode cable @ 160 MHz*km
  • 2-33m with 62.5 µm multimode cable @ 200 MHz*km
  • 2-66m with 50 µm multimode cable @ 400 MHz*km
  • 2-82m with 50 µm multimode cable @ 500 MHz*km
  • 2-300m with 50 µm multimode cable @ 2000 MHz*km

Cable length

2-300m

Fiber type

Multi Mode

Notes

For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.

   

 

HP X132 10G SFP+ LC LR Transceiver(J9151A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on single-mode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only

Connectivity

Connector type

LC

Wavelength

1310 nm

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)

Weight

0.04 lb. (.02 kg)

Transceiver form factor

SFP+

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

Operating relative humidity

0% to 85%, noncondensing

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical

0.9 W

Power consumption maximum

1 W

Cabling

Cable type:
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:

  • 2m-10km with 9/125 µm single-mode cable

Cable length

2m to 10km

Fiber type

Single Mode

Notes

Conditioning patch cord cables are not supported.
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not recommended.

   

 

HP X132 10G SFP+ LC LRM Transceiver(J9152A)

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LRM standard, for 10-Gigabit connectivity up to 220 m on legacy multimode fiber.

Ports

1 LC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM); Duplex: full only

Connectivity

Connector type

LC

Wavelength

1310 nm

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)

Weight

0.04 lb. (.02 kg)

Transceiver form factor

SFP+

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

Operating relative humidity

0% to 85%, noncondensing

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical

0.7 W

Power consumption maximum

1 W

Cabling

Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations);
Maximum distance:

  • 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
  • 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
  • 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
  • 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km

Cable length

0.5m to 220m

Fiber type

Multi Mode

Notes

For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above.
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not recommended.

   

 

HP X132 10G SFP+ LC ER Transceiver(J9153A)

The SFP+ ER Transceiver will transmit 10Gbps over up to 40km using standard OM3 fiber cable. This product expands the HP Networking transceiver portfolio for connections from 0m to 40km. Use only genuine HP transceivers with your HP Networking equipment to ensure reliability and support.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only

Connectivity

Connector type

LC

Wavelength

1550 nm

Physical characteristics

Dimensions

2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x 1.19 cm)

Weight

.04 lb., Fully loaded

Transceiver form factor

SFP+

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical

1.3 W

Power consumption maximum

1.5 W

Cabling

Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:

  • 40km

Fiber type

Single Mode

Notes

Check switch release notes for minimum version of software required to support this transceiver.
Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details.

   

 

HP X132 10G SFP+ LC ER Transceiver(J9153A)

The SFP+ ER Transceiver will transmit 10Gbps over up to 40km using standard OM3 fiber cable. This product expands the HP Networking transceiver portfolio for connections from 0m to 40km. Use only genuine HP transceivers with your HP Networking equipment to ensure reliability and support.

Ports

1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only

Connectivity

Connector type

LC

Wavelength

1550 nm

Physical characteristics

Dimensions

2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x 1.19 cm)

Weight

.04 lb., Fully loaded

Transceiver form factor

SFP+

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical

1.3 W

Power consumption maximum

1.5 W

Cabling

Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:

  • 40km

Fiber type

Single Mode

Notes

Check switch release notes for minimum version of software required to support this transceiver.
Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details.

Для этого товара нет дополнительных изображений
 
Наверх