Cisco SPA-1CHOC3-CE-ATM

Cisco SPA-1CHOC3-CE-ATM
Нажмите, чтобы увеличить
Цена: уточняйте
Артикул: SPA-1CHOC3-CE-ATM
Производитель: Cisco

Features

Descriptions

Product compatibility

Cisco 7600 Series Routers

Cisco ASR 1000 Series Router

Cisco ASR 9000 Series Router (CE only)

Port density per SPA

1-port ChOC3/STM-1

Physical interface (ChOC3)

OC-3c/STM-1 SFP optics module (refer to optical parameters in Table 2)

Visual status indicators (LEDs):

• SPA status LED
• Per-port LEDs
• Carrier and alarm
• Active and loopback

Protocols

Circuit Emulation:

• RFC 4553
• draft-ietf-pwe3-cesopsn-07.txt

ATM

• IETF RFC 2684 (updated RFC 1483) support for multiple protocol encapsulations over ATM
• IETF RFC 2364 and 2516 for Point-to-Point Protocol (PPP) over ATM
• IETF RFC 1577 support for classical IP and Address Resolution Protocol (ARP) over ATM
• ATM Forum User-Network Interface (UNI) 3.0, 3.1, and 4.0

Features and Functions

Circuit Emulation

• MPLS encapsulation for CESoPSN and SAToP PWE transport
• 320 ms jitter buffer
• T3/E3, T1/E1 and nxDS0 CEoP PWEs
• Maximum of 84 T1s, 63 E1s or 575 nxDS0 groups
• Jitter and wander compliant to G.823/G.824 traffic interface
• Synchronous, differential or adaptive clock recovery modes
• Targets 15ppb or better adaptive clock recovery accuracy
• BITS support
• Configurable clock source

ATM

• CBR
• VBR-nrt
• VBR-rt
• UBR and UBR+
• Maximum virtual circuits: 2000 (subject to overall configuration limitations)
• ATM and IP CoS
• Per-virtual circuit and per-virtual path traffic shaping
• Per-virtual circuit and per-virtual path statistics
• PWE3 support
• ATM permanent virtual circuits (PVCs) and switched virtual circuits (SVCs)
• F4 and F5 OAM cell support
• Interim Local Management Interface (ILMI) 1.0
• Layer 2 transport and Layer 3 termination on the same port
• ATM over MPLS
• IMA

SONET Errors, Alarms, and Performance Monitoring

Synchronization

• Local (internal) or loop timed (recovered from network)
• Pointer activity monitoring

Local (diagnostic) and line (network) loopback

Payload mapping

• POS with 1 + X^43 self-synchronous scrambler

SONET/SDH compliance

• Telcordia (Bellcore) GR-253-CORE (as applicable)
• ANSI T1.105, T1.231
• ITU-T G.707, G.957, G.825 (as applicable)

Supported SONET/SDH alarm and signal events

• Signal failure bit error rate (SF-ber)
• Signal degrade bit error rate (SD-ber)
• Signal label payload construction (C2)
• Path trace byte (J1)
• Section
• Loss of signal (LoS)
• Loss of frame (LoF)
• Error counts for B1
• Threshold crossing alarms (TCA) for B1
• Line
• Line alarm indication signal (LAIS)
• Line remote defect indication (LRDI)
• Line remote error indication (LREI)
• Error counts for B2
• TCA for B2
• Path
• Path alarm indication signal (PAIS)
• Path remote defect indication (PRDI)
• Path remote error indication (PREI)
• Error counts for B3
• TCA for B3
• Loss of pointer (LoP)
• Positive stuffing event (PSE)

Negative stuffing event (NSE)

Path unequipped indication signal (PUNEQ)

Path payload mismatch indication signal (PPLM)

Network management

RFC 2558 MIB (SONET/SDH)

Simple Network Management Protocol (SNMP)

Reliability and availability

Online insertion and removal (OIR)

Field-replaceable SFP optical modules

1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols

Single SPA software reset

Physical specifications

Weight: 0.75 lb (0.34 kg)

Height: 0.8 in. (2.03 cm) (single height)

Width: 6.75 in. (17.15 cm)

Depth: 7.28 in. (18.49 cm)

Power

1-Port CHOC-3/STM-1 = 19W (no optics)

Environmental specifications

Operating temperature: 41 to 104°F (5 to 40°C)

Storage temperature: -38 to 150°F (-40 to 70°C)

Operating humidity: 5 to 85% relative humidity

Storage humidity: 5 to 95% relative humidity

Telecommunication Interface Industry Standards

TIA-968-A (U.S. requirement, formerly known as FCC Part 68)

G.703

G.704

G.823

G.824

CS-03 (Canada)

T1.403

Compliance and agency approvals

Safety

• UL/CSA 60950-1
• IEC/EN 60950-1
• AS/NZS 60950.1
• EN60825/IEC60825 laser safety
• 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety

EMC

• FCC Part 15 (CFR 47)
• ICES 003
• CISPR 22
• AS/NZS CISPR22
• VCCI
• EN55022
• EN55024
• EN300 386
• EN50082-1
• EN61000-6-1

Network Equipment Building System (NEBS)

This product is designed to meet the following requirements (official qualification may be in progress):

• SR-3580-NEBS: Criteria levels (Level 3 compliant)
• GR-63-CORE-NEBS: Physical Protection
• GR-1089-CORE-NEBS: EMC and Safety
Для этого товара нет дополнительных изображений
 
Наверх